Install on either log loaders or excavators without compromising the primary functionality/performance of the machine.
More economical than a dedicated, traditional yarder.
More flexibility with less equipment.
Provides versatility for yarding large, second growth timber to thinning applications, uphill or downhill retrieval.
Smaller machine profile required than a dedicated yarder.
|Switch from boom operation to yarding operation in minutes.
Quick disconnect blocks make changing from yarding to loading fast and easy.
Highlead (flat or downhill) and shotgun carriage (uphill) yarding flexibility.
High speed power-out for shotgun yarding. Hydraulic brake interlock for highlead yarding.
2 speed operation: 25,000# yarding capacity in low gear, and line speed up to 1,400’/min in high gear.
Winch direction and speed controlled by either joysticks or travel pedals.
High performance hydraulic winches with piston motors.
2 speed, ‘shift on the fly’ inhaul and high-speed reverse.
Easy switch from travel to winch mode.
Cab mounted electrical control console controls all system functions.
Indicator lights for function status.
Reinforced right side front mounted winch platform.
|LOW SPEED: IN HAUL
||25,000# @ 139 FPM
||16,049# @ 218 FPM
||11,818# @ 295 FPM
|HIGH SPEED: IN HAUL
||5,360# @ 646 FPM
||3,437# @ 1,108 FPM
||2,531# @ 1,378 FPM
WIRE ROPE CAPACITY - SELECTED DRUM SIZES
Best in thinning, selective cuts and clear cuts; steep and wet terrain.
Accuracy to 300’.
Hydraulic winch mounted on top/rear of main boom.
Integral slack kicker mounted at top of heel rack.
Cable guides, trays, hydraulic plumbing protection, sheaves, fairlead.
Cab mounted installation of electrical controls including control box, harness, switches & controls.
Add a second yarder/haulback winch and in minutes you can go from tong throwing to shotgun yarding.
|Add even more capability to your tong thrower by adding a dual winch system to your machine.
|Boom-mount or right front corner mount.
Best suited for close-in, clean-up work, and “picking corners”.